Surgical AI · scan to robot

Surgical AI that turns scans into robot-ready plans.

We build surgical AI for medical device companies: anatomy AI and planning software that runs inside their robots, navigation systems and patient-specific devices.

Explore the Platform Discuss a Partnership
Knee AI · CE-marked on partner's label Built for device companies Surgeon in control
De-identified CT, coronal view of the lumbar spine, pelvis and hips The same CT with AI segmentation: L1 to L5, pelvis, sacrum and femurs in colour
AI

DE-IDENTIFIED CT
● AI SEGMENTATION
L1 L2 L3 L4 L5
PELVIS SACRUM FEMUR
3D · AI model · spine + pelvis
Drag across the scan
x 000 · y 000
10,000+surgeries planned with our AI
200+robots run our knee AI · 150+ commercial
<5 minknee: scan to surgeon-approved plan, review included
4procedure planner templates, customized per company
The intelligence gap

Robots are precise. The intelligence behind them is still manual.

Planning and registration are still done by hand: slow, costly and different from expert to expert. AI does it in minutes, the same way every time, but building that AI yourself takes years, money and scarce talent.

PreOp · Manual planning~2 hto segment one knee CT, before planning even starts

129 min by hand vs 3.7 min with AI. Then landmarks and implant planning, which vary from expert to expert.

Segmentation times · 42-patient TKA study1
AlgoSurg Planning AI<5 min scan to consistent, surgeon-approved plan
Building it yourself4+ teamsto build surgical AI from zero

Scarce, costly AI talent and years of R&D, outside your core hardware.

AI research · software · clinical · regulatory
AlgoSurg1 partner one stop, all procedures, ~6 months to software
IntraOp · Manual setup≈ $1,100of OR time on ~30 min of manual navigation steps

Manual registration adds minutes to every case. Hospitals buy robots that save OR minutes, not add them.

~30 min per bone-tumor case2 × $36–37 per OR minute3
AlgoSurg IntraOp In developmentAI registration and plan check in the OR
  1. Li et al. Development and Validation of an Artificial Intelligence Preoperative Planning and Patient-Specific Instrumentation System for Total Knee Arthroplasty. Bioengineering 2023;10(12):1417. doi:10.3390/bioengineering10121417
  2. Wong KC, Kumta SM. Computer-assisted Tumor Surgery in Malignant Bone Tumors. Clin Orthop Relat Res 2013;471(3):750–761. PMC3563803
  3. Childers CP, Maggard-Gibbons M. Understanding Costs of Care in the Operating Room. JAMA Surgery 2018;153(4):e176233. jamanetwork.com
The AlgoSurg stack

Automate the intelligence, from scan to execution.

Pre-operative AI is commercial today. Intra-operative AI — registration and execution for navigation and robotics — is the next layer, built on the same engine.

AlgoSurg Plan · 4 procedure planners

From scan to surgeon-approved plan.

Anatomy AI, landmarks and planning in minutes, approved by the surgeon. Knee is commercial with a device partner.

Import→Understand→Plan→Review→Deliver
See all planners →
AlgoSurg IntraOp · Next layer

Bring the approved plan into the OR.

Registration, plan verification and execution interfaces for third-party robots and navigation. A preclinical prototype.

Connect→Register→Verify→Execute
Explore IntraOp →
Commercial proof

Licensed to a global device leader. In commercial use.

Commercial · CE-marked on partner's labelAlgoSurg knee planning AI

Licensed non-exclusively to Meril, it powers pre-operative planning on the MISSO robotic knee platform, in commercial use across India. The partner's robotic knee system that includes it is CE-marked under EU MDR on its label; we supplied the software documentation for that submission.

200+robots in India run our knee AI · 150+ commercial
More partner software
Commercial · US FDA-clearedDeftFixExternal-fixator planning, licensed to SH Pitkar; cleared on its label
Near commercialTAVR planningValve sizing and reports, built for a device partner
Knee planneras delivered to MerilSurgeon-approved planRobot
What we provide

One AI engine. Delivered as models or planners.

Trained on your CT and MRI data, built around your implants and workflow, licensed at the depth your product needs.

Input · yours
  • CT · MRI scans
  • Implant library
  • Surgical workflow
AlgoSurg engine

Anatomy AI for multiple procedures

  1. Segment
  2. 3D model
  3. Landmarks
  4. Measure

Trained and validated on your data.

Output 01 · AI models

Inside your software

Through an API. Segmentation, 3D and landmarks for knee, hip, pelvis, spine, jaws and teeth today.

See spine AI →
Output 02 · Procedure planners

Surgeon-facing planning

Knee, hip, bone tumor and TAVR templates, customized with your implants and workflow, as a module or a full white-label app.

See the knee planner →
How we work together

Your system. Our AI.
One product.

From your data to integrated software in months. Land one module, then expand across procedures and systems. Device companies license non-exclusively and keep their implants and hardware.

01 / SCOPE

Data + workflow

Your CT data, implant library, procedure steps and target hardware.

02 / TRAIN

AI models

Segmentation and landmark models trained and validated on your data.

03 / ~3 MONTHS

First API cut

AI integrated into your software through a defined API.

04 / ~6 MONTHS

Full software

Planning software with your implants and workflow, plus documentation for regulatory submission.

05 / EXPAND

More procedures

New anatomies, procedures and intra-operative modules on the same engine.

Timelines are typical and depend on procedure complexity and integration scope. Branding can be yours, shared or ours; today our partners hold the clearances, e.g. Meril (EU MDR CE mark) and SH Pitkar (US FDA).

Licensing options: API, embedded module, white-label app or full stack →
Build with AlgoSurg

Bring surgical intelligence into your product.

Start with an AI model for your anatomy, a procedure planner built around your implants, or a connected planning + intra-operative stack.

Discuss a Partnership